Modular Handrail Designs
 

 

HOME :: ORDER STATUS :: CONTACT

 

Modular Handrail Designs, LLC
2031 Carolina Place Drive
Fort Mill, SC  29708
info@railing-designs.com

Monday - Friday
8:00 A.M. TO 4:00 P.M. Eastern
Order Online 24/7

We ship to the U.S., Canada, and Puerto Rico.

All items are in stock unless otherwise noted.

Add items to shopping cart to see shipping options and pricing.

 


Stainless Steel and Glass Railings With Glass Spider Clips

Glass Rail With Spider Clips

See Components Diagram

1.9 top rail and posts1.9" ř Top Cap and Posts, 13 Gauge Wall
3/8 tinted glass infill3/8" Tinted Glass Infill
3/8 clear glass infill3/8" Clear Glass Infill
single spider clipsSingle and Double Spider Clips
double spider clipsMirror Finish Only
top and side mounted railing
Side and Top Mounted
glass infill panels not includedGlass Panel Not Included
post spacing 42 to 48Recommended Post Spacing is 42" to 48"
COMPONENTS USED IN THIS DESIGN:  CLICK COMPONENT FOR DETAILS
Purchaser responsible for ensuring that desired parts and application meet load requirements.


 

PLEASE NOTE:  We do not sell our railing systems "by the section".  You must purchase all components required to build your railing section(s), based on the size and installation requirements of your particular project.  We do not sell standard-sized sections of our modular railings.  They do not come pre-assembled.

 

Finish:  All railing systems and components are polished to a #8, mirror finish.  Our products are solid stainless steel, and may be re-polished to your preferred finish.  However, we do not provide re-polishing services.

We do not stock any alternate finishes.

Post Spacing:  We recommend 42" to 48".

Tube Cutting:  We will provide posts cut to your custom size specifications for $5.00 per cut - for straight and/or mitered cuts, plus deburring. Just add your preferred, cut lengths in the "Ordering Instructions" box when checking out.

Tube Cutting Procedures:  Stainless steel tubing should be cut at a slow rotational speed.  At Modular Handrail Designs, we use Kasto cold saws with carbide-tipped saw blades at 24 RPM.  If you are using an abrasive saw, please be aware that it will generate a lot of heat between the tubing and cutting blade.  The heat produced by this process will discolor the stainless tubing, and will require polishing.  The polishing can be done using a polishing pad and rouge compound.  In general, chop saws and compound miter saws operate at a lower RPM than miter saws.  The lower the RPM, the better the resulting cut.

Infill Panels:  We do not offer glass or stainless steel infill panels.  It is incumbent upon the purchaser to arrange for their infill panels to be made at or before the time of purchasing the railing system.  Our railing systems accommodate 3/8" and 1/2" infill panels.

Drill & Tap:  We do not offer drilling and tapping services.  For information about drill bit sizes, please click here.

How to order?  Click here for complete ordering information.

 

 SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

 

 

 

Exclusive U.S. Reseller for Titoz®, a division of Rinox Engineering.
All Rights Reserved 2010-2012©